Troubleshooting And Tips - ZUMEX Speed Manuel De L'utilisateur

Troubleshooting and tips

To eliminate an error, press OK briefly and check that the cause of the fault is corrected, as
indicated in the table below.
ERROR POSSIBLE CAUSE
01 Cover Does not detect the cover safety device
02 Tray Does not detect container
03 Motor power The motor does not work at correct voltage
04 Halt Electricity cut
05 Overcurrent The motor has over-consumption
06 No Float Does not detect buoy
07 Credit Counter limit reached
08 Waste Limit Counter limit reached
ACTION
Check cover placement
Check side outlet placement
Check magnet placement
Check connected cables
Check cover detector
Check container placement
Check wiring connection
Check container detector
Check mains voltage
Check electronics plate
Check mains voltage cable
Check inner connection of cables
Check obstacles in juice
extraction system
Check fruit hardness
Check motor
Check cooling
Position buoy correctly
Position tank correctly
Check wiring
Check detector
Eliminate counter limit
Reprogram counter limit
Press "OK" for longer until
you hear a double "beep"
zumex.com