ZUMEX Speed Manuel De L'utilisateur page 30

Tap Self Service Up (44U), Tap Self Service S
You have purchased a multi-function tap. This enables you to produce juice either discontinuously
or continuously without having to press the button.
See the different possibilities in: Assembly of components according to model, SS Tap Up
(44U), SS Tap S +plus (44+).
Speed S Tank All-in-One (90), Speed Pro Cooler Podium (100)
+plus
Make sure that the Tank (53) or Tank (70.6) is placed as close as possible to the sensor on the base.
Make sure that the buoy is placed correctly on the lid and that it moves freely (Fig. 5+ and 6).
If the Tank/Cooler buoy (52) is not in place, the machine will not work (Fig. 16).
AUTOMATIC MODE
When you connect the machine at the start of the day, select the START button
for the machine to start up.
The machine starts to squeeze until the tank is full and the Level detector (56)
does not find the Tank/Cooler buoy (52). The machine will stop then.
When the juice level gets low again, the machine will start up again, about 15" after it has
not detected the buoy, and so on and so forth, in automatic mode.
The full or half full tank symbol will appear unless STOP has been pressed, indicating that
although the machine is in automatic mode, it has stopped, waiting for the tank to be
emptied, in order to re-start the filling process. When you press STOP, the symbol will
disappear as the machine is no longer operating.
(44+)
+plus
PROFESSIONAL MODE
The machine will start up when you press START and will stop when the Level
detector (56) does not find the Tank/Cooler buoy (52) or reaches the assigned
volume. When the level drops, the machine will not start up again until you press
START again.
It has 3 different filling volumes, according to your juice needs.
MANUAL MODE (In case the sensor does not work)
If the Level detector (56) does not work, enter the menu and activate the MANUAL
MODE. When you do this, you will be able to enjoy all the machine functions without
the detector, until this is repaired.
1
"AUTOMATIC" MANUAL
Non stop operation.
2
3
"PROFESSIONAL" MANUAL
Program the number of oranges to be squeezed. The machine will stop when it
reaches the selected value or the STOP button is pressed.
4
Remember! In manual mode, you must keep a watch over the juice level so that it
never flows over, as level function has been annulled.
EN
1
2
1
2
57