Technical Features; Instructions For Use; Preparation; Unpacking And Start-Up - ZUMEX Speed Manuel De L'utilisateur

Technical features

Model Weight
Speed Pro Basic 66.3 Kg
Speed Pro Cooler Podium
116.1 Kg
Speed Up 76.7 Kg
Speed Up All-in-One Wide Black 133 Kg
Speed Up All-in-One Narrow Black
129.1 Kg
Speed Up All-in-One Wide Mirror 122.1 Kg
Speed Up All-in-One Narrow Mirror 113.3 Kg
Speed S +plus
83.5 Kg
Speed S +plus All-in-One Wide Black 131.5 Kg
Speed S +plus All-in-One Narrow Black 127.6 Kg
Speed S +plus All-in-One Wide Mirror
120.6 Kg
Speed S +plus All-in-One Narrow Mirror 111.8 Kg
Speed S +plus Tank All-in-One 110.1 Kg
OTHER CHARACTERISTICS (For all models)
Voltage 120 V | 60 Hz
Power 300 W (560 W Cooler)
Consumption 2.7 A (4.87 A Cooler)
Oranges per minute
Fruits*
Size of fruit
Feeder capacity
Protection
Sound pressure level
* For other fruits squeezed always check with your nearest dealer.
Dimensions
| Width x Height x Depht |
146.1 lb 593 x 584 x 980 mm 23.3" x 23" x 38.6"
259.6 lb 675 x 727 x 1837 mm 26.6" x 28.7" x 72.3"
169.2 lb 593 x 624 x 1050 mm 23.3" x 24.6" x 41.3"
293.3 lb 810 x 682 x 1775 mm 31.9" x 26.8" x 69.9"
284.7 lb 710 x 682 x 1775 mm 28" x 26.8" x 69.9"
269.3 lb 805 x709 x 1774 mm 31.7" x 27.9" x 69.8"
249.8 lb 700 x709 x 1774 mm 27,5" x 27.9" x 69.8"
184.1 lb 593 x 665 x 1050 mm 23.3" x 26.2" x 41.3"
290 lb 810 x 682 x 1775 mm 31.9" x 26.8" x 69.9"
281.4 lb 710 x 682 x 1775 mm 28" x 26.8" x 69.9"
266 lb 805 x709 x 1774 mm 31.7" x 27.9" x 69.8"
246.5 lb 700 x709 x 1774 mm 27,5" x 27.9" x 69.8"
242.8 lb 675 x699 x 1755 mm 26.6" x 26.3" x 69.1"
220-240 V | 50-60Hz
300 W (560 W Cooler)
1.2 A (2.4 A Cooler)
40 37/40
Oranges, tangerines, limes, grapefruits
65-81 mm (45-67 mm with Kit S)
20 kg / 44 lb
IPX4
Lower 70 dB(A)

Instructions for use

Preparation

To start to extract juice, you must follow the steps below:
1 Unpack your juicer and place it on as flat a surface as possible.
2 Make sure that the mains voltage coincides with the voltage indicated on the machine
identification label that you will find on the machine.
3
Ensure that no obstacles hinder you during the unpacking process.
! Before first use, we recommend that you clean the juicing system.
Please see the section entitled 'Cleaning' .

Unpacking and start-up

Follow the instructions given, depending on the machine model you have purchased. The
following components could be loose and if so must be installed properly:
Speed Pro Basic
Right cover side outlet (2), Left cover side outlet (3), Power cable (15), Protector cable (16),
Plastic juice container (30), Inner plastic filter (31), Plastic juice filter (32), Peel bucket (33),
Drip try (34).
See Figures 1 and 2.
Speed Pro Cooler Podium
Right cover side outlet (2), Left cover side outlet (3), Power cable (15), Protector cable (16),
Plastic juice container (30), Inner plastic filter (31), Plastic juice filter (32), Cooler Unit (70),
Tank/Cooler Buoy (52).
See Figures 1 and 6. See section Podium Cooler (100) for information about your machine
stand.
EN
39