Troubleshooting And Tips; Eu Declaration Of Conformity - ZUMEX SPEED PRO Série Manuel De L'utilisateur

TROUBLESHOOTING AND TIPS

To eliminate an error, press "OK" briefly and check that the cause of the fault is corrected, as indicated in the
table below.
ERROR POSSIBLE CAUSE
01 COVER Does not detect the cover safety device
02 TRAY Does not detect container
03 MOTOR POWER The motor does not work at correct voltage
04 HALT Electricity cut
05 OVERCURRENT The motor has over-consumption
06 NO FLOAT Does not detect buoy
07 CREDIT Counter limit reached
08 WASTE LIMIT Counter limit reached
ACTION
Check cover placement
Check side outlet placement
Check magnet placement
Check connected cables
Check cover detector
Check container placement
Check wiring connection
Check container detector
Check mains voltage
Check electronics plate
Check mains voltage cable
Check inner connection of cables
Check obstacles in juice
extraction system
Check fruit hardness
Check motor
Check cooling
Position buoy correctly
Position tank correctly
Check wiring
Check detector
Eliminate counter limit
Reprogram counter limit
Press "OK" for longer until
you hear a double "beep"

EU DECLARATION OF CONFORMITY

ZUMEX GROUP S.A., whose registered offices are situated at Polígono Industrial de Moncada III, C/ Molí, 2 - 46113
- Moncada, Valencia (Spain) does here by declare, under its sole responsibility, that the Zumex Speed Pro Basic,
Zumex Speed Pro Self-Service, Zumex Speed Pro Self-Service Podium Drain&Clean System, Zumex Speed Pro
Tank Podium Drain&Clean System, Zumex Speed Pro Cooler Podium juicer machine models conform to the
following harmonised standards:
en 60335-1 2012 Safety of household electrical appliances and similar. Part 1: General requirements
Safety of household and similar electrical appliances. Part 2-64: Particular
en 60335-2-64 2000
+ a1 2002 requirements for commercial electric kitchen machines
Measurement methods for electromagnetic fields of household appliances and
en 62233 2008
similar apparatus with regard to human exposure
en 55014-1 2008 Electromagnetic compatibility. Requirements for household appliances, electric
+ a1 2009 tools and similar apparatus. Part 1: Emission
+ a2 2011
en 55014-2 1997 Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for harmonic current
+ a1 2001 emissions (equipment input current <= 16 A per phase)
+ a2 2008
Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for harmonic current
en 61000-3-2 2006
+ a1 2009 emissions (equipment input current <= 16 A per phase)
+ a2 2009
en 61000-3-3 2008 Electromagnetic compatibility (EMC). Part 3-3: Limits. Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems,
for equipment with rated current <= 16 A per phase and not subject to conditional
connection
nsf/ansi 8 2012 National Sanitation Foundation. Commercial powered food preparation equipment
nsf/ansi 51 2014 National Sanitation Foundation. Food equipment materials
53