Maintenance - Dentsply Sirona CEREC Primescan AC Notice D'utilisation

6 Maintenance

58
6
Maintenance
WARNING
Danger of touching live parts
If the housing is damaged, there is a possibility of touching live parts
inside the unit.
➢ Check that the unit is intact. The unit can only be used for work
purposes if it is intact.
➢ If the housing is damaged, the unit must be put and left out of
operation until it has been professionally repaired.
NOTE
Regular inspection
Some countries have legal regulations which require regular safety
inspections of electrical devices or systems by the operator.
Dentsply Sirona would like to draw your attention to the fact that a so-
called "retest" (repeat test) must be carried out for the CEREC
Primescan AC / Primescan AC / CEREC Omnicam AC / Omnicam AC
acquisition unit at least every three years. In addition, this retest also
must be performed following every repair or retrofit of components
such as the PC, the PC power supply, the CEREC Primescan /
Primescan / CEREC Omnicam / Omnicam scanner, and the scanner
cable.
Dentsply Sirona
Operating Instructions
67 15 481 D3696
D3696.201.01.03.02 04.2019