Insert Battery (Optional) - Dentsply Sirona CEREC Primescan AC Notice D'utilisation

Masquer les pouces Voir aussi pour CEREC Primescan AC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Dentsply Sirona
Operating Instructions
67 15 481 D3696
D3696.201.01.03.02    04.2019
4.4.3

Insert battery (optional)

CAUTION
Risk of fire or chemical injury
Improper handling of the storage battery used in this unit can lead to
a risk of fire or chemical injury.
➢ Do not dismantle the storage battery, allow it to heat up above
45°C or burn it.
➢ The battery must only be replaced by a spare part provided by the
manufacturer. Use of other storage batteries can lead to a risk of
fire or explosion.
A
Service cover
B
Storage battery
C
2 fastening screws
1. Open the service cover on the back panel.
NOTE
Risk of fault during operation and defects to the system
If the storage battery is not screwed down, faults during operation and
defects to the system may occur.
➢ Always screw the storage battery down tightly.
4 Installation and startup
4.4 Initial startup
D
2 guide rails
E
2 guide pins
39

Hide quick links:

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Primescan acCerec omnicam acCerec primescan aOmnicam ac

Table des Matières