Using A Trackball (If Provided, Depending On The Configuration) - Dentsply Sirona CEREC Primescan AC Notice D'utilisation

4 Installation and startup
4.4 Initial startup
38
Notes on network installation
The network card is installed.
The cable with the RJ-45 connectors establishes the network
connection or is connected to the CEREC radio module.
The acquisition unit is equipped with a WLAN card which establishes
the connection to the network.
The network software and the driver for the network card must be
installed by your network administrator.
4.4.2 Using a trackball (if provided, depending on the
configuration)
➢ Use the trackball in the recess (spherical calotte/spherical cap) on
the operator console.
Dentsply Sirona
Operating Instructions
67 15 481 D3696
D3696.201.01.03.02 04.2019