Operating State Led; Important - Dentsply Sirona CEREC Primescan AC Notice D'utilisation

Dentsply Sirona
Operating Instructions
67 15 481 D3696
D3696.201.01.03.02 04.2019

Operating state LED

3.4
To position the operating state LED, see chapter "Overview of the rear
panel [→ 28]".
LED lights up blue:
LED flashes blue:
LED lights up green:
LED flashes green:
LED lights up red:
LED flashes red:
LED lights up orange:
LED flashes orange:

IMPORTANT

The storage battery is only 30% pre-charged
The storage battery is only 30% pre-charged upon delivery. Connect
the unit to the line voltage with the power cord in order to achieve the
full capacity of the storage battery.
Acquisition unit is connected with the socket.
The storage battery is charged when the socket is con-
nected.
The system is being started up or has started up.
The storage battery is charged while the system is being
started up/has started up.
Error
Error in communication (between power supply unit/battery
and interface PCB).
The system is not connected with the socket. Storage bat-
tery is charged. The system is being started up or has
started up.
The system is not connected with the socket. The storage
battery is not fully charged.
3 Product description
3.4 Operating state LED
29