Device Description; Initial Use; Entering User Data - Beurer BF 180 Mode D'emploi

6. Device description

Overview
1. Display
2. Sensor button on
top side of scale
3. Sensor button on
top side of scale
4. Sensor button on
top side of scale
5. Electrodes

7. Initial use

Inserting the batteries
If present, pull the battery insulating strip off the battery compartment cover or remove the battery's pro-
tective film and insert the battery according to the polarity. If the scale does not function, remove the bat-
teries completely and reinsert them.
As the battery compartment is secured with at least one screw, use an appropriate tool (screwdriver) for
battery change.
Changing the weight unit
When supplied to the customer, the scale is set to weigh in "kg". Switch on the scale by briefly applying
pressure to the standing surface with your foot (approx. 1-2 seconds). Wait until "
display. To the rear of the scale, there is a button where you can select "pound" and "stones" (lb, st).
Positioning the scale
Place the scale on an even, hard surface; a hard surface is crucial for achieving accurate
measurements.

8. Entering user data

To calculate your body fat percentage and additional body values, you must save the personal user data.
The scale has 10 user memory spaces which allow you and members of your family to save and access
personal settings, for example.
• Place the scale on an even hard surface; a hard surface is crucial for achieving accurate meas-
urements.
• Switch on the scale by briefly applying pressure to the standing surface with your foot (approx. 1-2 sec-
onds). Wait until "
• Start configuring the settings by pressing the
• Press the / button to select the desired memory space and confirm by pressing the
5
kg" appears in the display.
1
button. The first memory space flashes in the display.
15
2
3
4
5
kg" appears in the
button.