Fitting The Collar; Maintenance; Troubleshooting - Dogtra YS300 Notice D'utilisation

FITTING THE COLLAR

The collar strap should be adjusted so that the contact points are
between the collar strap and your dog's neck.
If the collar is too loose, electrical contact will be inconsistent and
your corrections will be inconsistent also.

MAINTENANCE

Periodically wash the Anti-Bark Collar with alcohol or detergent.
Dry thoroughly after washing.
44

TROUBLESHOOTING

My dog keeps barking. Is the Anti-Bark Collar
working properly?
• Check and see that dogtra Anti-Bark Collar is turned on.w
• Tighten the collar strap and make sure the contact points are held
• Recharge the battery if it is discharged.
• Increase the electric stimulation levels.
time.
- If you consider the intensity of stimulation too light, increase
the level gradually.
- You have to be very careful in deciding the intensity level.
The electrical contact can be inconsistent or it can give rise
intensity level.
45