Accessories And Spare Parts; Docking Station; Accessories; Spare Parts - Dräger Polytron 8100 Notice D'utilisation

11

Accessories and spare parts

This chapter gives an overview of the main parts that are
covered by the BVS 13 ATEX G 001 X type examination. For
other parts refer to the spare parts list or contact
DrägerService.

11.1 Docking Station

NOTICE
i i
The Docking Station is not included with the e-version
of the instrument.
Description
Docking Station Power Only Version
Docking Station Power, Relay (includes 2 cable
glands)
Cable Gland Docking Station

11.2 Accessories

Description
Calibration adapter PE, Europe
Remote cable with plug, 5 m (16 ft)
Remote cable with plug, 30 m (98 ft)
Duct mount adapter for EC Sensing Head
Remote (1)
Sensor test dongle
Diagnostic dongle
IRDA interface to connect to PC
Magnetic wand with key chain
(1) May have an influence on measurement performance,
i.e. increasing the response time. Not covered by
BVS 13 ATEX G 001 X.
Dräger Polytron 8100

11.3 Spare parts

Description
PCB unit Polytron 8100 4-20/HART
PCB unit Polytron 8100 4-20/HART, Relay
PCB Docking Station
Feed-through 3 wires
Feed-through 9 wires
Feed-through 14 wires
Part
Hardware kit enclosure
Number
Hardware kit Docking Station
68 12 420
Cable gland Docking Station
68 12 275 Galvanic Isolator
Sensor circuit board (EC sensing head local)
68 12 868
Sensor circuit board (EC sensing head remote)
Bayonet ring
Part
Number
68 06 978
83 23 305
83 23 330
83 17 617
83 17 619
83 17 860
45 44 197
45 44 101
Accessories and spare parts
Part
Number
45 44 781
45 44 782
68 12 839
45 44 182
45 44 169
45 44 168
45 44 167
68 12 838
68 12 868
45 44 367
45 44 368
45 44 369
45 44 366
45