Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning and
maintenance
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Always check the device before using it for
obvious deficiencies such as loose, worn
or damaged parts, correct the position-
ing of screws or other parts. Examine the
grinding disc in particular. Exchange the
damaged parts.
Cleaning
Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under run-
ning water.
• Thoroughly clean the device after every
use.
• Clean the ventilation openings and the
surface of the device with a soft brush
or cloth.
Storage
• Store the device in a dry and dustproof
location and out of reach of children.
• Before prolonged storage, remove the
rechargeable battery from the device
and charge it fully.
• The storage temperature for the re-
chargeable battery and the device is
between 0°C and 45°C. Avoid extreme
cold or heat during storage to ensure
the battery output is not adversely af-
fected.
• Cutting/grinding discs must be dry and
stored upright and should never be
stacked.
Disposal and protection
of the environment
Remove the rechargeable battery before
disposing of the device!
The device, accessories and packaging
should be properly recycled.
Instruction on how to dispose of the re-
chargeable battery can be found in the
separate instruction manual for your bat-
tery and charger
Machines do not belong with do-
mestic waste.
• Take the device to a recycling plant.
The plastics and metals in the unit can
be sorted and appropriately recycled.
Ask our Service Centre for details.
• Defective units returned to us will be
disposed of for free.
GB
IE
37
Publicité
Chapitres
Table des Matières
Dépannage
