Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
4.

ELECTRICAL CONNECTIONS

Attention: link up all N.C. contacts (if not used) by means of jumpers.
4.1 Controls
Control
1
2
CLOSING
N.O.
AUTOMATIC
CLOSING
1
3
N.O.
OPENING
1
8
N.C.
REVERSE
SAFETY
1
9
N.C.
STOP
4.2 Output and accessories
Output
1
+
24 V= / 0,15 A
0
-
0
15
12 V / 1,2 A (max)
+B -B
12 V / 1,2 Ah
T1-T2
Function
The closing operation starts when the contact is closed.
A permanent contact enables the automatic closing.
The opening operation starts when the contact is closed.
The opening of the contact during the closure operation causes the re-
verse movement (re-opening).
The opening of the contact causes the stop of any movement and the
exclusion of every normal or emergency functioning.
Value
Accessories power supply. Output for external accessories power supply
(including accessories connected to the connectors T1 and T2).
Electric lock.
Battery kit. The automation is fitted with a battery that guarantees the conti-
nuous working even without a mains supply.
To charge the batteries, connect the mains power and the batteries at least 30
seconds before starting the system. To disconnect the control panel, you must
disconnect the power supply and the batteries.
Attention: the batteries must always be connected to the control panel for char-
ging.
Periodically check the efficiency of the batteries.
Note: the operating temperature of the rechargeable batteries is approximately
+5°C/+40°C.
The batteries should be installed inside a climatised environment to ensure the
correct functioning of the product.
Connectors for connection to external command accessories (example: RER radar).
Attention: to use RER radar, position the dip-switch of the radar in the DX
position.
ON-OFF switch. Switch for activating/deactivating. When activating (ON posi-
tion), the first operation is carried out with the acquisition of the stop positions.
When deactivating (OFF position), the line power supply and the batteries are
disconnected from the control panel.
Description
Description
15
GB
SPRINT - IP1546

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sprintj

Table des Matières