Flight Control - Horizon Hobby HobbyZone AeroScout Manuel D'utilisation

Masquer les pouces Voir aussi pour HobbyZone AeroScout:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Flight Control

IMPORTANT: Even though SAFE technology is a very helpful tool, the aircraft
still needs to be fl own manually. If incorrect input is given at lower altitudes
or at slower speeds, the aircraft can crash. Study these control inputs and the
aircraft response to each carefully before attempting your fi rst fl ight.
For fi rst fl ights, set the SAFE® fl ight mode switch to Beginner Mode (position 0).
For smooth control of your aircraft, always make small corrections. All
directions are described as if you were sitting in the aircraft.
Flying faster or slower: When your aircraft is stable in the air, push the
throttle stick up to make the aircraft go faster. Pull the throttle stick back to
slow down. The aircraft will climb when the throttle is increased.
Elevator up and down: Push the elevator stick forward to make the aircraft
go down. Pull the elevator stick back to go up.
Aileron right and left: Move the aileron stick right to make the aircraft roll or
"bank" right. Move the aileron stick left to bank left.
TIP: Always picture yourself in the aircraft when determining which way to
bank the aircraft wings. When the aircraft is fl ying away from you, banking
the aircraft right or left appears normal. When fl ying toward you, the aircraft
will appear to bank the opposite direction to the control input given. This will
become more instinctual with experience.
Rudder left and right: Push the rudder stick left or right to yaw or point the
nose of the aircraft left or right. The rudder stick is also used to steer the
aircraft left and right while taxiing on the ground.
TIP: Similar to aileron control, picture yourself in the aircraft to determine
which direction to point the nose whether you are fl ying away from yourself or
toward yourself.
Transmitter command
13
EN
Aircraft Response
AeroScout S

Publicité

Table des Matières
loading

Table des Matières