Lenze 8200 motec Instructions De Montage page 116

7
Commissioning
The most important codes for commissioning
Code
No. Name
C0002 Parameter set
* transfer using
s
the keypad
uSEr
(cont.)
114
Possible settings
Lenze Selection
ð
Keypad
71 With function module
Application−I/O, INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
11 With all other function modules
ð
Keypad
72 With function module
Application−I/O, INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
12 With all other function modules
ð
Keypad
73 With function module
Application−I/O, INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
13 With all other function modules
ð
Keypad
74 With function module
Application−I/O, INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
14 With all other function modules
Controller
80 With function module
Application−I/O, INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
20 With all other function modules
ð
Keypad
40 Only with function module
INTERBUS, PROFIBUS−DP,
LECOM−B, DeviceNet/CANopen
Function module
50 Only with function module
INTERBUS, PROFIBUS−DP,
LECOM−B, DeviceNet/CANopen
EDK82MV222 DE/EN/FR 8.0
PAR1 (+ FPAR1)
PAR2 (+ FPAR1)
PAR3 (+ FPAR1)
PAR4 (+ FPAR1)
ð
Keypad
Function module
ð
Keypad
IMPORTANT
Overwrite selected parameter
set and, if necessary, FPAR1
with the corresponding keypad
data
All available parameter sets
(PAR1 ... PAR4, and FPAR1) are
copied to the keypad
Overwrite the module−specific
parameter set FPAR1 only
Copy the module−specific
parameter set FPAR1 only
L