Hitachi C 12LSH Mode D'emploi page 25

PRACTICAL APPLICATIONS
WARNING:
* To avoid personal injury, never remove or place a workpiece on the
* Never place your limbs inside of the line next to warning sign while
Line Warning sign
1. Switch operation
Fig. 24
WARNING:
table while the tool is being operated.
the tool is being operated. This may cause hazardous conditions (see
Fig. 23).
Trigger switch
Hole
This will ensure that the power tool cannot be turned on accidentally
or by someone (especially a child) who is not qualified to use the
power tool.
To prevent unauthorized operation of this tool, insert a padlock
through the hole in the switch trigger.
Fig. 23
Pull the trigger to turn on the switch, release
it to shut it off.
After releasing the trigger, make sure the
trigger has gone all the way back and the
switch is turned off.
English
Warning sign Line
25