Intended Use; Residual Risk; Transportation And Storage - Ryobi RLM18X40H240 Instructions Originales

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
Following this rule will reduce the risk of electric shock.
In case of damage and improper use of the battery,
irritate the respiratory system.
summer hot or cold conditions.
Do not incinerate the battery.
flush with water. If liquid contacts eyes, additionally
cause irritation or burns.
LAWN MOWER SAFETY WARNINGS
blade bolts, and cutter assembly are not worn or
damaged.
Replace worn or damaged blades and bolts in sets to
The blade on this mower is sharp, use extreme caution
cleaning or checking bolt security.
damaged or unreadable labels.
for proper tightness to be sure the equipment is in safe
working condition.
Check the grass box frequently for wear, holes or
deterioration.
Replace worn or damaged parts before operating the
product.
handlebar does not properly start and stop the mower.
position, this is extremely dangerous.
safer at the speed for which it was designed.
Do not pull the product backward unless absolutely
necessary. If you must back the product away from a
Stop the motor and allow the blade to stop if the
mower has to be tilted for transportation when crossing
surfaces other than grass, and when transporting the
product to and from the area to be mowed.
or grass boxes, in place.
Do not tilt the lawn mower when switching on the motor
or whilst the motor is running. This exposes the blade
Switch on the motor carefully according to instructions
and keep hands and feet away from cutting area. Keep
clear of the discharge opening at all times. Do not start
the machine when standing in front of the discharge
opening.
2
| English
Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all time.
complete stop for the below cases:
(including disposal of grass clippings).
before cleaning a blockage or unclogging discharge
chute
before checking, cleaning or working on the product
for damage and make repairs as necessary before
restarting and operating the machine.
immediately)
inspect for damage, particularly the blades
replace or repair any damaged parts
check for and tighten any loose parts
and fall accident.

INTENDED USE

The product is only intended for use outdoors.
The product is designed for domestic lawn mowing. The
cutting blade should rotate approximately parallel to the
should touch the ground while mowing. It is a pedestrian
controlled walk behind mower designed to be pushed by
hand.
the ground; it should not be pulled or ridden on. It should
not be used to cut anything other than domestic grass
lawns.

RESIDUAL RISK

impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
time and exposure.
protection and limit exposure.
Contact with blades

TRANSPORTATION AND STORAGE

a complete stop, and allow it to cool before storing or
transporting.
Clean all foreign material from the machine. Store it in

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Olm1840h

Table des Matières