What Are Presets And How To Use Them; Percussion - Key B Organ viscount Legend Mode D'emploi

User Manual
the Black Octave (Legend and Legend Classic) or the [DRAWBARS SET B] button (Legend Live). The
pedalboard drawbars are always active. The led on the Black Octave key (Legend and Legend Classic) or
the button [DRAWBARS SET] (Legend Live) show which Set is currently in use.

4.2 WHAT ARE PRESETS AND HOW TO USE THEM

The most famous electromechanic organs were also equipped with drawbars combinations through which
factory Presets could be used, without the need to manually change the position of the drawbars. These
combinations, which back then could not be modified by the user, were called Presets and could be accessed
through the first octave of the keyboard, characterised by inverted key colours and therefore called Black
Octave.
Legend and Legend Classic have a Black Octave for each manual and includes 9 Presets, that can be
recalled through the keys from C# to A.
Legend Live has two Preset for each manual. To recall them, press the buttons [UPPER PRESETS 1] and
[UPPER PRESETS 2] for the upper manual, or [LOWER PRESETS 1] and [LOWER PRESETS 2] for the lower
manual.
As in the original organs, the pedalboard has no Preset.
EDITING AND SAVING PRESETS
To edit and store a Legend and Legend Classic Preset, follow these steps:
1. Select the Set A of the manual whose Preset you wish to edit, through the Black Octave of the
corresponding manual.
2. Configure the Preset to your liking by adjusting the drawbars of the Set A corresponding to that manual.
3. Press and hold the [TRANSPOSE SELECT] button, then simultaneously press the C key on the Black
Octave. The leds start to blink, indicating that the instrument is ready to save a Preset.
4. While still holding [TRANSPOSE SELECT], press the Black Octave key corresponding to the Preset you
want to edit and save.
5. Release [TRANSPOSE SELECT].
To edit and save Legend Live Presets, follow these steps:
1. Press the [DRAWBARS SET A] button of the manual whose Preset you wish to edit.
2. Configure the preset to your liking by adjusting the drawbars of the Set A corresponding to the manual.
3. Press and hold the [TRANSPOSE SELECT] button, then simultaneously press the [DRAWBARS SET A]
button. The leds start to blink, indicating that the instrument is ready to save a Preset.
4. While still holding down [TRANSPOSE SELECT], press the button [UPPER PRESETS] or [LOWER
PRESETS] corresponding to the Preset you want to edit and save.
5. Release [TRANSPOSE SELECT].

4.3 PERCUSSION

The percussion, typical feature of electromechanical organs, provides a replication of a harmonic that is added
to those set through drawbars, with a rapid attack and an exponential decay. On the original instrument,
percussions are generated only when the drawbar Set B is selected, and the sound generated by the drawbar
1' was disabled when percussion was active: Legend / Legend Classic / Legend Live also has these
features.
LEGEND and LEGEND CLASSIC LEGEND LIVE
EN - 18