Memphis Style" Mode; Calibration Of The Expression Pedal; Settings Relative To Pedals; Settings Of Audio Connections [Fx Send] And [Analog In] - Key B Organ viscount Legend Mode D'emploi

User Manual
use of the potentiometer as a [TREBLE] control, while holding down [TRANSPOSE SELECT], press the E4 key
in the upper manual.

6.5 "MEMPHIS STYLE" MODE

It is called "Memphis style" the mode of using the rotating speakers unplugging the motors on the lower rotor,
so that only the upper rotor continues to spin. This mode allows you to have a solid bass sound and the treble
that continue to be modulated. Legend / Legend Classic / Legend Live allows you to simulate this mode with
the internal Rotary effect.
To activate the "Memphis style" mode, while holding down [TRANSPOSE SELECT], press the A2 key of the
upper manual.
To deactivate the "Memphis style" mode, while holding down [TRANSPOSE SELECT], press the G#2 key in the
upper manual.

6.6 CALIBRATION OF THE EXPRESSION PEDAL

By connecting an expression pedal to the [EXP] connector, it may be useful to calibrate it if the pedal's
operating range is not complete.
To calibrate the pedal, follow this procedure:
1) Position the pedal in the minimum position (pedal fully raised).
2) While holding down the [TRANSPOSE SELECT] button, press the F#4 key of the upper manual.
3) Place the pedal in the maximum position (pedal completely lowered).
4) While holding down the [TRANSPOSE SELECT] button, press the G#4 key of the upper manual

6.7 SETTINGS RELATIVE TO PEDALS

[ROTARY] PEDAL
You can choose the mode of operation of the pedal connected to the [ROTARY] connector of the Legend and
Legend Live or the lever control located on the expression pedal of the Legend Classic, by which the speed
of the internal Rotary effect or the Rotary speaker connected to the [ROTARY SPEAKER] connector is selected.
By default, the operation is as described in the table at point 3 of par. 3.3, with the rotation speed selected
each time the pedal is pressed ("toggle" mode).
By holding down [TRANSPOSE SELECT] and pressing the D#5 key of the upper manual, the rotation speed
can be changed only when the pedal is pressed while releasing the speed, the speed back to the one
selected by the lever ("momentary" mode).
Holding down [TRANSPOSE SELECT] and pressing the C#5 key of the upper manual returns the default
operation.
[EXP] PEDAL
You can adjust the level of the audio signal when the expression pedal connected to the [EXP] connector is at
the minimum position. By default, the signal level with the pedal at minimum is attenuated but not muted. If you
want the signal to be completely muted, press and hold [TRANSPOSE SELECT] while pressing the G3 key of
the upper manual.
By holding down [TRANSPOSE SELECT] and pressing the A3 key of the upper manual, the minimum level is
reset to the default value.

6.8 SETTINGS OF AUDIO CONNECTIONS [FX SEND] AND [ANALOG IN]

EFFECT SEND [FX SEND]
By default the effect send of the [FX SEND] connector transmits the general audio signal of the instrument. It is
possible to send on this output only the signal coming from the upper manual and not that of the lower manual
and pedalboard if you do not want to process them with an external effects processor. To do so, while holding
down [TRANSPOSE SELECT], press the D#4 key of the upper manual. To return to the default condition, while
holding down [TRANSPOSE SELECT], press the C#4 key of the upper manual.
EN - 24