Transceiver TIC - Guide utilisateur / User guide version V2.0.0
6.2.3 DIN-Rail fixing
This system, integrated into the casing, enables the product to be fastened onto a standard 35 mm rail.
•
To fit the casing, place the upper inserts on the rail and lower the product to clip it into position.
•
To remove the product, pull the unlocking lever down and disengage the product from the rail.
Locking onto the DIN-Rail
7. DOCUMENT HISTORY
Version
V2.0.0
V1.0.1
V1.0.0
Contents
Addition of the positive or negative frame, addition of the timestamp
Small corrections
Creation
1
Unlocking
FR
EN
2
Page
93
of 98