Service Mode - FriFri Vision Manuel D'installation

d) Service Mode
In the "Programming Mode" the program number 20 is the "Service Mode".
The "Service Mode" allows to modify different parameters of the fryer.
Confirmation
Selection of the
parameter
Upper Lower
Exit of the
parameter parameter
Program
The selected parameter lights up more strongly.
After the selection of the parameter the choice must be confirmed with the "P" button.
Change of the setting with the left/right "Selector" or "Quick Access" buttons.
Confirm the change of settings with the "P" button.
Another parameter for modification can be selected now.
Exit of the "Service Mode" by pressing the "Quick Access" button.