FriFri Vision Manuel D'installation page 51

Select the parameter who shall be modified with the left/right "Selector" buttons or a "Quick Access" button.
The selected parameter lights up more strongly.
Confirm the choice by pressing the "P" button.
Confirmation
Change of the
settings
Back to the inital
setting
Exit of the
Selection Selection
program
of the minimum of the maximum
value value
The selected parameter is flashing.
Change of the setting with the left/right "Selector" or "Quick Access" buttons.
Confirm the change of settings with the "P" button.
Remark:
If the frying time is set to "0", the program does not appear for the operator in the "Frying mode".
If the parameter "Quality Alarm" is set inactive in the "Service Mode", no adjustment can be made in the
"Programming".
c) Exit of the program
Either by pressing the „Quick Access" under the following symbol or „P" button for three seconds.
We can now modify another program or leave the programming mode by pressing the "P" button for another three
seconds.