Fat Melting Cycle (Fmc) - FriFri Vision Manuel D'installation

3 seconds
Programming FMC
Pumping Frying cycle

5.4 Fat melting cycle (FMC)

"Idle » symbol"
Set temperature
Heating symbol
Program N°
Oil temperature
The position fat melting cycle allows to melt slowly fat by heating up with breaks in between. In this way the fat is
liquefied and heated up without any smoke and deterioration
It is possible to adjust the setting between 30 and 90°C in the programming mode. See chapter "Service Mode".
If you do not wish to use the function FMC, you can take off this function in the "Service Mode".
In this way the fryer will heat continuously to reach the selected frying temperature.