DeWalt D55270 Guide D'utilisation page 9

WARNING: RISk Of HOT SURfACES
WhAT CAn hAPPen
• Touching exposed metal such
as the compressor head,
engine head, engine exhaust
or outlet tubes, can result in
serious burns.
WARNING: RISk fROm mOvING PARTS
WhAT CAn hAPPen
• The engine can start
accidentally if the flywheel is
turned by hand or moved by
pulling on the starter rope.
hoW To PreVenT IT
• Never touch any exposed
metal parts on compressor
during or immediately after
operation. Compressor will
remain hot for several minutes
after operation
• Do not reach around
protective shrouds or attempt
maintenance until unit has
been allowed to cool.
hoW To PreVenT IT
• Always disconnect the spark
plug and bleed pressure from
the air tank before performing
maintenance.
• Moving parts such as the
pulley, flywheel, and belt can
cause serious injury if they
come into contact with you or
your clothing.
• Attempting to operate
compressor with damaged or
missing parts or attempting
to repair compressor with
protective shrouds removed
can expose you to moving
parts and can result in serious
injury.
9
• Never operate the compressor
with guards or covers which are
damaged or removed.
• Keep your hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long
hair can be caught in moving
parts.
• Air vents may cover moving
parts and should be avoided as
well.
• Any repairs required on this
product should be performed
by a D WALT factory service
e
center or a D WALT authorized
e
service center.