Brief Description Of The Press Device - NovoPress AFP202 Manuel D'utilisation

Information!
The batteries are not charged when delivered.
Therefore
– Charge the batteries before using them for the first time.
Information for 14.4 V DC batteries
The rechargeable batteries only achieve full capacity after recharging 4-
5 times.
Battery charger
For information on the function and operation of the battery charger and the rechargeable
batteries, please consult the Operating Manual provided for the battery charger.
6

Brief description of the press device

6.1 Automatic press cycle (Fig. 1)
The press device features positive control. During pressing, the press device remains in the
position reached, even if button (1) is temporarily released. When the intended switch-off force
is achieved, it is perceptible by means of an increase in the motor speed and a discernible
decrease in pressure. After releasing button (1), the device returns to its initial position. For
safety reasons, the positive control is only activated after a minimum force has been attained.
Until this force is achieved, the pressing process can be interrupted at any time by releasing the
button. The device then automatically returns to its initial position.
6.2 Release button (Fig. 1)
In the event of an emergency, release button (1) immediately. During pressing, the press device
remains in its current position. By pressing and holding release button (2), the piston in the
press device returns to its initial position.
6.3 Rechargeable battery (AFP202 only)
6.3.1 Removing the battery (Fig. 2)
Press the two release buttons (A) inwards (1) and then remove battery (2).
6.3.2 Inserting the battery (Fig. 3)
Slide the battery onto the device as illustrated until it clicks in.
15
AFP202/EFP202
EN