Dimensions - HASE Granada Mode D'emploi

The Granada stove, certifi ed in compliance with DIN-EN 13240 : 2001 + A2 2004 and
Art. 15 a B-VG (Austria), can only be operated when the fi re box is closed; more than
one device can be connected to the chimney, if the reduction panel was installed..
VKF No.: 11670; Inspection Report No. (A): RB BF-1Hn 1029
The following data applies to the chimney characteristics in accordance with EN 13384-1 / -2:
Combustion Values
Nominal Thermal Output
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
CO content at 13% O2
Effi ciency
Particulate
Depending on the insulation of the building, the nominal thermal output of 9 kW
indicated on the unit's type plate is suffi cient for 35 - 130 m² (subject to change).

Dimensions:

Stove
Fire Box
Weight
Wood
Connection Dimensions:
9 kW
Connection height
10 g/s
Connection height back, pipe centre
Distance from back wall of stove to fl ue pipe centre
270 ˚C
Connection height Combustion air inlet, pipe centre*
11 Pa
1488 mg/m³
Fire Box Opening
78 %
Flue Pipe Diameter
35 mg/m³
Flue Pipe Diameter Hase-Combustion air inlet*
Connection branch top (rear installation possible.)
*For separate air supply in low-energy houses and insuffi cient combustion air supply in the
room where the stove is installed
Height Width
153,5 cm 57 cm
62 cm 28 cm
249 kg
Depth
52,5 cm
30 cm
143 cm
133,5 cm
14,5 cm
13 cm
630 cm²
150 mm
100 mm
67