Behavior In Cases Of Error - ATT NUSSBAUM SPRINTER MOBIL 2500 Manuel D'exploitation

7

Behavior in cases of error

Defective operational readiness of the system may be due to a simple error. Check the system for the listed
sources of error.
If the error cannot be removed after an inspection to the named causes, then inform customer service or
your dealer.
Problem: Motor does not start
Possible causes:
No power supply
The main switch (2) is not switched on, or is
defective
Defective fuse
"LIFT" (3) button defective
Motor defective
Problem: Motor starts, load is not lifted
Possible causes:
Load is too heavy
Hydraulic oil fi lling level is too low
Emergency discharge fi xture is not closed
Pressure line leaking
The connector for the left is designed for a
clockwise phase order.
Problem: The lift cannot be lowered
Possible causes:
Lifting table is sitting on an obstacle
Hydraulic valve defective
"LOWER" (4) button defective
Incorrect push button actuated
64
Remedy:
Check the power supply
Check the main switch (2).
Have fuses checked
Inform customer service
Inform customer service
Remedy:
Unload the lift
Refi ll hydraulic oil
Check emergency discharge fi xture
Inform customer service
Your power socket may not match. One of the
phases must be swapped.
Remedy:
See 7.1 Moving onto an obstacle
Inform customer service
Inform customer service
Push the correct push button
SPRINTER MOBIL - HYMAX PRO 12.06.2015 AD H9451