Cleaning And Care Of Stainless Steel - ATT NUSSBAUM SPRINTER MOBIL 2500 Manuel D'exploitation

Do not use and aggressive and abrasive materials
for cleaning, rather use mild cleaners, e.g. a com-
mercially available detergent and luke warm wa-
ter.
• For cleaning, do not use high pressure washers
(e.g. steam cleaners).
• Carefully remove all contamination with a
sponge, or if required with a brush.
• Make sure that there is no residue of the cleaner
on the system.
• Dry the system with a cloth and spray it with a
spray wax or oil.
6.3

Cleaning and care of stainless steel

In all cases after assembly, a fi rst cleaning should
be done with our stainless steel cleaner. We recom-
mend our stainless steel cleaning spray (1) for this.
Immediately remove iron particles, grinding dust,
swarf, and weld spatter. These foreign bodies can
accelerate rust if they are deposited on the stain-
less steel surface. The passive layer of the non-
corroding steel is broken and this leads to pinhole
corrosion.
To guarantee a perfect stainless steel, in principle
we recommend regular cleaning and care of stain-
less steel in exterior areas (at best every 6 months).
Contamination and deposits that have already
occurred or severe corrosive etching can be re-
moved with our special "Pelox" cleaner (2).
For stainless steel products that are placed close to
seawater, seawater resistant products can be im-
plemented in V4A quality.
Detailed information
www.edelstahl-rostfrei.de.
All stainless steel parts from the Feldmann product
range are made from V2A or V4A with material
numbers 1.4301 or 1.4401104. The surface is ground
(mostly 240 grit).
Despite the "rust-free" specifi cation, stainless steel
parts can rust!
AD H9451 12.06.2015
can be found under
SPRINTER MOBIL - HYMAX PRO
Stainless steel stands for a guarantee for long life-
time and elegance. To permanently retain the high
value of the surface, it is indispensable to take care
of and protect the material regularly.
Rust bloom can occur due to environmental infl u-
ences or improper treatment.
How does rust bloom occur?
Environment related:
• For higher humidity with salt content close to salt
water.
• In industrial areas with particularly aggressive air
contamination (acid rain).
• By surfaces in contact with de-icing salt spray wa-
ter close to streets.
• By contact with chlorine water (V2A is not suitable
for swimming pools).
Assembly related:
• During processing with tools that are in contact
with normal iron.
• From fl ying sparks that occur e.g. due to grinding
of the surface.
• When the surface comes into contact with
building-chemical related foreign materials (cal-
cium, cement dust, etc.) that deposit on the sur-
face.
• Aggressive cleaning materials.
1. Cleaner spray 7064-PF cleans, cares for and
protects stainless steel parts.
2. Pelox 7065-PE special cleaner for the strongest
contamination, fi lms and corrosion.
3. Cleaner and preservative 50-ESP cleans and
protects (long term protection).
63