Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GSC 75-16 Professional Notice Originale

OBJ_BUCH-2740-001.book Page 11 Friday, January 22, 2016 9:39 AM
Loosen the fastening screw 8 for the bottom cutter. Adjust
the required cutter clearance a with the adjustment screw 7.
The upper cutter 5 and the bottom cutter 6 may not touch
each other. Retighten the fastening screw 8 for the bottom
cutter with a tightening torque of 4–6 Nm.

Maintenance and Service

Maintenance and Cleaning

 For safe and proper working, always keep the machine
and ventilation slots clean.
Replace the blade (see figure A)
The upper cutter 5 and the bottom cutter 6 are identical, have
four cutting edges each, and can be exchanged with each other.
Turn or replace the cutters in good time. Only sharp applica-
tion tools achieve good cutting capacity and make the ma-
chine last longer.
To replace the upper cutter 5, loosen the fastening screw 4; to
replace the bottom cutter 6, loosen the fastening screw 8.
Turn the cutter by 90° or install a new cutter. When installing
the bottom cutter 6, pay attention that it faces against the ad-
justment screw 7.
Note: Do not turn the cutter. The edges must be at the top or
front, see figure A. Cutting is not possible if the cutter is in-
serted incorrectly.
Retighten the fastening screw 4 for the upper cutter and the
fastening screw 8 for the bottom cutter with a tightening
torque of 4–6 Nm. Check the cutter clearance a (see "Adjust-
ing Cutter Clearance a", page 10).
Upper cutter 5 and bottom cutter 6 may not be reground.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can
also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
Disposal
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools into household waste!
English | 11
1 609 92A 1S7 | (22.1.16)