Remote Control - geo-FENNEL FKL 55 Mode D'emploi

EN
INDICATION OF THE ROTATION CENTRE
Press button 3 to activate the LED of the laser start point. From this point on the grade of the laser
beam will start (which influences the grade setting). Press button 3 again to quit. This function can also
be activated with the remote control.
Start laser point
H
L1 L2
Grade = H / L1 + L2

REMOTE CONTROL

The FKL 55 (Green) pipe laser is supplied with an IR remote control. The keypad functions of the
remote are the same as of the laser.
With the remote control all features can be controlled. But the ON/OFF function can only be operated
on the instrument!
Exception: ON/OFF button
If the laser is powered on it will be turned to stand-by mode by pressing the ON/OFF button. The va-
lues set will be stored, the laser stops working, the laser beam is turned off and the laser beam flashes
quickly. Press the button ON/OFF again to re-start working.
If the laser is in stand-by mode for more than 30 min. it will automatically switch off.
Remote control range front: 100 m (laser emitting window)
Remote control range back: 50 m (end of the handle).
25