Technical Data - Scheppach 39048029914 Traduction Des Instructions D'origine

• Only use accessories recommended by the manu-
facturer.
• Have your tool serviced only by qualified personnel
and by use of original spare parts only. This ensures
that the tool will work safely in the future.
Residual risks
• There will always be residual risks, even if you use
this equipment according to instructions. The following
hazards can occur in connection with the construction
and design of this tool.
• Health hazards resulting from swinging of hand and
arm if the equipment is used for an extended period
and if it is not operated or maintained properly.
• Injuries and material damage caused by ejection of
tool attachments which are unexpectedly thrown from
the equipment because of sudden damage, wear and
tear or improper attachment.
• Warning! This tool generates an electromagnetic field
during operation. Under certain circumstances, this
field can affect active or passive medical implants. In
order to reduce the risk of severe or fatal injuries, we
recommend that people with medical implants consult
their doctor and the manufacturer of the medical im-
plant before operating the machine.
• Use the gripping spikes for every cut as the starting
point and always start the cut with the saw chain run-
ning. Make the cut in such a way that the saw does
not get jammed in the wood.
• Pay particular attention to branches under tension.
• Always pull the tool out of the wood when the saw
chain is running.
• Never work with the tool above shoulder height or with
only one hand.
• Always stand away from the falling direction. Position
yourself on a slope above the tree to be felled.
• Always stand sideways when carrying out sawing work
on a tree which is located on a slope, never work from
above or below.
• Always look out for the falling direction of the parts
which are cut off.
• Never start the cut with the bar tip and never cut with
the bar tip.
• Risk of kickback! There is always a risk of kickback
when the bar tip touches the wood or other objects.
This makes the chainsaw uncontrollable and it may be
thrown towards the operator with great force.
• Do not use the tool as a lever to move objects.
• Always use the chain guard during transport and storage.
• Secure the tool during transport in order to prevent
loss of fuel, damage or injury.
• Warning!
• Keep passers-by away from running equipment but
never work by yourself.
• Keep within earshot of others in case you need help.
• Stop the engine immediately when someone ap-
proaches you.
• Make sure that the saw chain does not come in con-
tact with foreign objects such as stones, fences, nails
and similar. These objects could be ejected and injure
the operator or passers-by or damage the saw chain.
30 GB
• National specifications may restrict the use of the pole
saw.
• Do not use the machine within 10 metres of a position
from which it can reach high-voltage cables.
Before working on the tool itself (e.g. transport, set-
up, retooling, cleaning and maintenance), discon-
nect the spark plug cap!

6. Technical data

RPMT330
Technical data
Cutting data grass trimmer
Cutting circle
diameter of line mm
Cutting line diameter
mm
Cutting line length m
Cutting data brush cutter
Cutting circle
diameter of blade
mm
Cutter balde
thickness mm
Teeth quantity
Cutting data hedge trimmer
Cutting circle
diameter mm
Bar length mm
Cutting length mm
Max. cutting speed
max. min-1
Cutting data pole saw
Bar length mm
Cutting length mm
Chain link thickness
Oil tank capicity l
Power unit
Displacement ccm
Max. engine output W
Fuel tank capicity l
2-stroke engine, air-cooled
Engine type
Weight grass trim-
mer kg
Weight brush cut-
terr kg
Weight pole saw kg
Weight hedge trim-
mer kg
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L = 94 dB(A)
pA
Sound power L = 114 dB(A)
WA
Uncertainty K = 3 dB(A)
PA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration A = 5,0 m/s
2
hv
Uncertainty K = 1,5 m/s
2
PA
430
2 x 2.4
4
255
1.4
3
24
406
400
1550
305
254
1.3
0.125
32.6
900
0.9
7.2
7.2
7.1
7.7