Measurement; Enter Patient Id (Optional) - Aerocrine NIOX MINO Manuel De L'utilisateur

E N G L I S H

Measurement

Depending on what is shown on the display,
proceed as follows:
6
Stabilization in progress
Wait until ready
Instrument in sleep mode
Touch the display
Ready for use

Enter patient ID (optional)

Note!
If Patient ID is used, it has to be entered
before each measurement (even if it is the
same patient).
Input a patient specific ID number, up to 10 digits.
1. Select the ID button on the
main screen
2. Input the patient specific
ID using the number
buttons
Use the shift buttons to
change between digits 0 to
4 and 5 to 9
3. Select OK to accept the
patient ID
to