Niox Mino Visual Incentive; Install Visual Incentive; Start Visual Incentive; Download Instrument Data - Aerocrine NIOX MINO Manuel De L'utilisateur

E N G L I S H
NIOX MINO
A USB memory stick is delivered with NIOX MINO
containing the Visual Incentive program.
Operating System Requirements:
- Windows XP*, Vista, Windows
®
- Windows 32 or 64 bit
®
- .NET Framework 3.5 or higher
*Windows XP SP2 (Service Pack two). Installation
®
files included on USB memory stick.

Install Visual Incentive

1. Connect the USB memory stick to a USB
connector on the PC
2. Open the NIOX MINO Visual Incentive x.x.x.x
folder
3. Doubleclick the setup.exe file
4. Follow the instructions on the screen to install
the software on the PC

Start Visual Incentive

Note!
Make sure to have a connection between
NIOX MINO and the PC. Refer to the Connect
NIOX MINO to PC sections.
1. Doubleclick the NIOX MINO Visual Incentive
file
2. Select the Measurement tab
3. Select display mode
4. Optional: Enter a Patient ID (max 10 characters)
The ID is displayed at the top of the NIOX MINO
20
Visual Incentive
®
7 or 8
®
Main screen and saved with the measurement in
NIOX MINO
5. Click OK
6. Perform measurements using Visual Incentive,
see Measurement section page 7

Download instrument data

Note!
Only to be used after contact with Customer
support.
Make sure to have a connection between
NIOX MINO and the PC. Refer to the Connect
NIOX MINO to PC sections.
1. Doubleclick the NIOX MINO Visual Incentive
file
2. Select the Instrument Log tab
3. Check the Instrument log box
4. Click Download to download data from
NIOX MINO
5. Select the directory where to save the Instrument
Log file and click Save
Note!
The Instrument Log file is named with
serial number, date and time when it was
downloaded.

Shut down Visual Incentive

1. Click the icon to close the program