View Stored Results; Ambient No Measurement; Demonstration Mode - Aerocrine NIOX MINO Manuel De L'utilisateur

E N G L I S H

View stored results

A measurement result is automatically displayed at
the end of a measurement. All previous results are
stored in the instrument, and can be viewed at any
time.
1. Select Mode
2. Select Measurement
results
3. The latest stored
measurement is displayed,
showing:
A. FeNO value
B. Measurement mode
C. Patient ID
(if entered)
D. Sequence number
(each measurement
result is given a unique
identification number)
E. Time and date of
measurement
4. Use the previous and next
buttons to step through
the stored measurements
5. Select Return to go back
to the Mode screen

Ambient NO measurement

Note!
A completed ambient NO measurement is
counted as one measurement for the Sensor
and NIOX MINO
1. Attach a new patient filter
2. Select Mode
3. Select Ambient
measurement
4. Wait for result
(approximately 4 minutes)
8
A
B
C
D
E
.
®

Demonstration mode

Use this mode for a new patient in order
to demonstrate the different steps during a
measurement and the corresponding illustrations
on the display as well as light and audio feed-back.
(Sound volume has to be activated.)
1. Select Mode
2. Select Demo
3. The inhalation screen is shown and
the top light is turned off
4. Use the Forward button to advance
to the next screen
5. The normal exhalation screen is
shown
Correct exhalation pressure: The
cloud in a steady centered position,
the top light is lit, and the audio
emits a constant sound
6. Use the Forward button to advance
to the next screen
7. The exhalation too week pressure
screen is shown
8. Use the Forward button to advance
to the next screen
9. The exhalation too strong pressure
screen is shown
10. Use the Forward button to advance
to the next screen
11. The wait for result screen is shown
(static view)
12. Select Return to go back to the
Mode screen