The Accessories; How To Use - ESGE-Zauberstab GASTRO 200 Notice D'utilisation

The accessories

how To use ...

Attaching the accessories is very simple. Push the respective
attachment on to the drive stub of the mixer, so that the driver
pin on the stub fits into the notch of the attachment.
With centering to facilitate precise fitting of the attachments.
To remove the attachment, simply pull it off.
Only use original ESGE-Zauberstab
caution:
switch off and unplug appliance when changing accessories. the
attachments may be sharp.
Warning:
If the attachments are loose or do not fit firmly, readjust the
spring, as described on page 27.
For safety reasons the appliance is equipped with a press-
button switch, which means that the ESGE-Zauberstab
only when this switch is pressed down.
Switch on the appliance by pressing down the button only
when the cutter guard is in the receptacle. Switch off the ap-
pliance by releasing the press-button once you have finished
working. Then lift the appliance out of the receptacle. Get rid
of any pieces of food still adhering to it by tapping the shaft a
few times against your free hand.
liquid ingredients
To achieve a better mixture, hold the ESGE-Zauberstab
slight angle in the receptacle (e.g. when blending soups).
accessories.
®
works
®
®
at a
25