Icon Description; Startup - Hach TU5200 Manuel D'utilisation De Base

Icon Description
Logs in or logs out an operator. To log in, select an operator ID and then push Login. To log out,
push Logout.
Note: When an operator is logged in, the Login icon changes to the icon selected for the operator ID (e.g., fish,
Login
butterfly or soccer ball) and the text "Login" changes to the operator ID.
Selects the sample ID.
Sample ID
Starts a calibration.
Calibration
Starts a verification.
Verification
Compares process and laboratory measurements.
Link2SC
Shows the reading log, calibration log, verification log and compare log. Refer to
recorded data
Data Log
Configures the instrument settings. Refer to
Setup
Shows the firmware information, instrument backup, instrument updates, signaling information and
factory service data.
Diagnostics
Sets a timer.
Timer
Goes to the manufacturer's website for the latest software versions and user manual when the
instrument has a LAN connection.
Shows the user manual and video(s) for the instrument.
Documents

Startup

Personal injury hazard. Never remove covers from the instrument. This is a laser-based instrument and
the user risks injury if exposed to the laser.
Table 2 Sidebar menu icons
on page 18.
C A U T I O N
Configure the instrument settings
Show the
on page 12.
English 11