Display Description - Hach ION + Série Manuel D'utilisation

User interface and navigation
User interface
Keypad description
1 CALIBRATION key: start a
calibration , view calibration data and
change the calibration frequency
2 TEMPERATURE and STIRRER key:
change the temperature (°C, °F) or
the stirring speed
3 UP key: scroll to other options,
change a value
4 pH measurement key: start a pH
measurement

Display description

The meter display shows the concentration, units, temperature, calibration
status, date and time.
5 DOWN key: scroll to other options,
change a value
6 ON/OFF: turn on or turn off the meter
7 mV measurement key: start a ORP
(mV) measurement
Figure 4 Single screen display
1 Measurement unit and value (pH,
ORP (mV))
2 Measurement mode or time and date
Navigation
Use the calibrate key to calibrate the probe. Use the parameter key to
take a sample measurement. Use the TEMPERATURE and STIRRER key
to change the temperature (°C, °F) or the stirring speed. Use the arrow
keys to scroll to other options or to change a value. Be sure to look
at the display during tasks as the screens change quickly. Refer to each
task for specific instructions.
Start-up
Turn the meter on and off
N O T I C E
Make sure that the probe is connected to the meter before the meter is turned on.
Push to turn on or turn off the meter. If the meter does not turn on, make
sure that the AC power supply is properly connected to an electrical outlet.
Change the language
The display language is selected when the meter is powered on for the
first time.
Use the or to select a language from a list. The meter returns
automatically to the measurement screen after 3 seconds.
Note: To change the language from the main menu, push
3 Sample temperature (ºC or ºF)
4 Visual measurement timer
.
English 7