User Interface And Navigation; Display Description - Hach LANGE sensION+MM378 Manuel D'utilisation

User interface and navigation

User interface
Keypad description
1 RETURN key: cancel or exit the
current menu screen to the
previous menu screen
2 MEASUREMENT key: confirm the
selected option
3 UP key: scroll to other options,
change a value
4 RIGHT key: change between
Channel 1 and Channel 2, enter
numbers and letters

Display description

The meter display shows the concentration, units, temperature,
calibration status, operator ID, sample ID, date and time.
5 DOWN key: scroll to other options,
change a value
6 ON/OFF: turn on or turn off the
meter
7 LEFT key: change between
Channel 1 and Channel 2, enter
numbers and letters
Figure 4 Single screen display
1 Sample ID
2 Measurement unit and value
(conductivity)
3 Measurement unit and value (pH,
ORP/mV or ISE)
4 Measurement mode or time and
date
Navigation
Use the to return to the previous menu. Use the measure key
take a sample measurement or to confirm options. Use the arrow keys
to scroll to other options or to change a value. To change the
parameters use the arrow keys and . Refer to each task for specific
instructions.
Startup
Turn the meter on and off
N O T I C E
Make sure that the probe is connected to the meter before the meter is turned on.
Push to turn on or turn off the meter. If the meter does not turn on,
make sure that the AC power supply is properly connected to an
electrical outlet.
5 Measurement channel
6 Sample temperature (ºC or ºF)
7 Reference temperature
8 Visual measurement timer
to
English 9