Hach TU5200 Manuel D'utilisation De Base page 19

1. Push Data Log and select the applicable log to show.
2. To show the details of a log entry, select the log entry and then push View Details.
Note: To add a comment to the log entry, push the comments icon.
3. To only show the log entries recorded during a time interval or with a specific operator ID or
sample ID, do the steps that follow.
a. Push Filter, then select On.
b. Select an option.
Option
Time Interval Selects the time interval.
Operator ID
Sample ID
4. To send log data to a device (e.g., printer or USB flash drive), delete a log entry or show a
compare log or reading log entries in a graph, do the steps that follow.
a. Push Options.
b. Select an option.
Option Description
Delete Removes one of the items that follow.
• The selected log entry
• The log entries for a time interval
• The log entries with a specific operator ID
• The log entries with a specific sample ID
• All the entries in the selected log
Send Sends one of the items that follow to all the devices that are directly connected to the
Data instrument (e.g., printer or USB flash drive) and connected to the instrument by LAN (network
printer or FTP server).
• The selected log entry
• The log entries for a time interval
• The log entries with a specific operator ID
• The log entries with a specific sample ID
• All the entries in the selected log
View Shows the reading log entries that have the same sample ID in a graph. This option only
Graph shows when Compare Log or Reading Log is selected.
To add the log entries for another sample ID to the graph, push Options>Add Data. Select a
sample ID to add to the graph.
To show the details of a data point, touch a data point on the display or push the LEFT and
RIGHT arrows to select a data point.
Data points—Selects the symbol used for the data points. Control Limit—Sets the
minimum value and maximum value of the readings that show on the graph.
5
This option only shows when Reading Log or Compare Log is selected.
Description
Selects the operator ID.
Selects the sample ID. This option only shows when Reading Log or Compare Log is
selected.
5
5
English 19