4 Putting into operation
4.1 Equipping the torch neck PP Plus 36D
1
1
Gas nozzle
2
Contact tip
Fig. 1
Equipping the torch
4.2 Equipping the torch neck PP Plus 401D
1
1
Gas nozzle
2
Gas diffuser
Fig. 2
Equipping the torch
4.3 Mounting the wire guide
EN - 6
2
3
3
Tip adaptor
4
Gas diffuser
1 Screw gas diffuser (4) , tip adaptor (3) and contact tip(2) into
torch neck (5).
2 Slide the gas nozzle (1) rotating it slightly clockwise.
Insert the torch neck (5).
2
3
Contact tip
4
Tip adaptor
1 Screw tip adaptor (4), contact tip (3) and gas diffuser (2) into
torch neck (5).
2 Slide the gas nozzle (1) rotating it slightly clockwise.
Insert the torch neck (5).
NOTE
• New still unused liners or PA liners have to be shortened to the actual
length of the cable assembly.
4
5
3
4
5
PP Plus 36D/401D
5
Torch neck
5
Torch neck