Nameplate; Safety Instructions - Abicor Binzel PP Plus 36D Mode D'emploi

3 Safety Instructions

Standard length L (m)
Cooling unit power
Control lead
Weight/meter
Machine-side connections
Tab. 4 Cable assembly
Size
0,6 / 0,8 mm
0,8 / 0,8 mm
1,0 / 1,0 mm
1,2 / 1,2 mm
1,6 / 1,6 mm
Tab. 5 Wire feed rolls
2.1 Abbreviations
MIG
MAG
MAC
Voltage rating
PP Plus D
Tab. 6 Abbreviations

2.2 Nameplate

3 Safety Instructions
EN - 4
8,00
min. 800 W
7-wire
approx. 0.7 kg
Central connector WZ-2 (liquid-cooled),central connector KZ-2
(air-cooled)
Metal Inert Gas
Metal Active Gas
Maximum allowable concentration of harmful substances at the workplace
Classification of the insulation resistance, voltage strength and protection type
Hand-held Push-Pull welding torch with integrated drive and screwable interface
between cable assembly and torch neck with replaceable tip adaptor.
The welding torch system PP Plus is identified by a sticker on the machine side
connection housing giving detailed information regarding the version. When
making any inquiries, please remember the following information:
• Certificate of conformity, production stamp on the torch neck, for example
PP 36D, information on sticker.
Please observe the attached safety instructions.
Groove
U
U
U
U
U
PP Plus 36D/401D