Names And Functions Of Parts (Main Unit) - Esoteric P-02X Mode D'emploi

Names and functions of parts (main unit)

A
POWER button
Press to turn the unit on and off.
When the unit is on, the ring around the button lights blue.
When the unit is off, it is unlit.
When not using the unit, turn it off.
B
CLOCK indicator
This shows the clock synchronization status.
When the clock sync setting is set to IN or MCK22M, this will
begin to blink. When a clock signal is detected and synchroniza-
tion occurs, it will stop blinking and stay lit.
C
MENU button
Use to enter setting mode (page 25).
D
Remote control signal receiver
This receives signals from the remote control. When using the
remote control, point the end of it toward this receiver panel
(page 17).
E
Display
This shows playback time, track number and other information
(page 24).
F
Disc tray and shutter
The shutter opens and the disc tray comes out (page 18).
14
A B C D E F G H
G
Tray open/close (-) button
Press to open and close the disc tray (page 18).
H
Stop (8) button
Press to stop playback (page 19).
When stopped, press and hold for at least two seconds to
change the playback area of a Super Audio CD (page 23).
Press when in setting mode to complete changing settings and
show the ordinary display (page 25).
I
Play (y) button
Press to start disc playback (page 18).
During playback, the indicator next to this button lights.
J
Pause (9) button
Press to pause playback (page 19).
When paused, the indicator next to the play button blinks.
K
Skip (.//) buttons
Use to skip to the previous or next track (page 20).
Press and hold for at least one second during playback to search
backward/forward. Repeatedly press and hold for more than one
second to change the backward/forward search speed to one of
three levels (page 21).
Use to change parameters when in setting mode (page 25).
I J K