Names And Functions Of Parts (Main Unit) - Esoteric K-01Xs Mode D'emploi

Names and functions of parts (main unit)

A
POWER button
Press to turn the unit on and off.
When the unit is on, the ring around the button lights blue.
When the unit is off, it is unlit.
When not using the unit, turn it off.
B
CLOCK indicator
This shows the clock synchronization status.
This indicator blinks during clock synchronization, and it lights
when the unit is locked to the signal.
C
MODE button
Press when stopped to select disc playback or an external input
as the source. When set to external input, the unit can be used
as a D/A converter (page 21).
Press and hold for 2 or more seconds to change to setting mode
(page 24).
D
Remote control signal receiver
This receives signals from the remote control. When using the
remote control, point the end of it toward this receiver panel
(page 13).
E
Disc tray and shutter
The shutter opens and the disc tray comes out (page 17).
o Only K-01Xs models have shutters.
14
A B C D E F G H
F
Display
This shows the playback time, the number of tracks and other
information (page 18).
G
Tray open/close (-) button
Press to open and close the disc tray.
H
Stop (8) button
Press to stop playback (page 17).
When stopped, press and hold for at least two seconds to
change the playback area of a Super Audio CD (page 17).
Press when in setting mode to complete changing settings and
show the ordinary display (page 24).
I
Play (7) button
Press to start disc playback (page 16).
During playback, the indicator near this button lights.
J
Pause (9) button
Press to pause playback (page 17).
When paused, the indicator near the play button blinks.
K
Skip (.//) buttons
Use to skip to the previous or next track.
Press and hold for at least one second during playback to search
backward/forward. Repeatedly press and hold for more than one
second to change the backward/forward search speed to one of
three levels (page 18).
Use to change parameters when in setting mode (page 24).
I J K