Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting items and their options (contd.)
Automatic display darkening setting
DPaOFF>***
ON
If playback is stopped and no operation is conducted for 10 min-
utes, the OEL display automatically turns off.
OFF
The display will not turn off, but it will dim to DIMMER 1 bright-
ness to protect it from excessive wear.
o If the OEL display is left on with the same indication for a long time,
brightness irregularities can occur. For this reason, we recommend
that you set the automatic display darkening function to ON.
Automatic power saving setting
APS>***
o By default, the setting is 30m.
When the input source is CD/SACD, the unit will turn off automati-
cally if the set amount of time passes without a disc being loaded or
with the disc remaining stopped.
When the input source is COAX in, OPT in or USB in, the unit will turn
off automatically if the set amount of time passes without being able
to lock an input signal from the selected input source.
o The input sources that are not selected have no effect on auto-
matic power saving.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.
26

Dimmer

You can adjust the brightness of the main unit's disfplay.
DIMMER 3
c
(normal brightness)
DIMMER 2
c
DIMMER 1
c
(off )
o Even when the dimmer is set to off, the display will light at normal
brightness for about three seconds when you press 7 or another
button.
o Even when set to DIMMER 1 or off, setting menus and error mes-
sages will be shown with normal brightness (DIMMER 2).

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

K-03xs

Table des Matières