Intended Use; General Safety Warnings - Ryobi RCS3835T Traduction Des Instructions Originales

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Safety, performance, and dependability have been given
top priority in the design of your petrol chainsaw.

INTENDED USE

The product is only intended for use outdoors in a well
ventilated area. For safety reasons the product must be
adequately controlled by using two handed operation at all
times.
The product is designed for cutting branches, trunks, logs
and beams of a diameter determined by the cutting length
of the guide bar. It is only designed to cut wood. It is only
to be used in domestic application by adults who have
received adequate training on the hazards and preventative
measures/actions to be taken whilst using it.
Do not use the product for any purpose not listed above. It
is not to be used for professional tree services. The product
is not to be used by children or by persons not wearing
adequate personal protective equipment and clothing.
WARNING
When using the product, the safety rules must be
followed. For your own safety and that of bystanders,
you must read and fully understand these instructions
before operating the product. You should attend
a professionally organised course on the use and
aid. Please keep these instructions safe for later use.
WARNING
Chainsaws are potentially dangerous tools. Accidents
involving the use of chainsaws often result in loss of
limbs or death. It is not just the product that is the hazard.
Falling branches, toppling trees, rolling logs can all kill.
Diseased or rotting timber poses additional hazards.
You should assess your capability of completing the task
safely. If there is any doubt, leave it to a professional
tree surgeon.

GENERAL SAFETY WARNINGS

Some regions have regulations that restrict the use of
the product. Check with your local authority for advice.
Never allow children or people unfamiliar with the
instructions to use the product. Local regulations may
restrict the age of the operator.
Ensure before each use that all controls and safety
devices function correctly. Do not use the product if the
"off" switch does not stop the engine.
Never start or run the engine in a closed or poorly
ventilated area, breathing exhaust fumes can kill.
Clear the work area before each use, a cluttered and
untidy work area leads to accidents.
Wear full eye and hearing protection, strong sturdy
gloves, safety boots with non-slip soles as well as head
protection while operating the product. Use a face mask
if operation is dusty.
Do not wear loose fitting clothing, short trousers or
jewellery of any kind.
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Beware of thrown, flying or falling objects. Keep all
bystanders, children, and animals at least 15 m away
from work area.
Never operate the product in an explosive or flammable
atmosphere.
Maintain a firm grip on both handles while using the
product.
Stay alert, watch what you are doing, and use common
sense when operating the product. Do not operate the
product while tired, ill or under the influence of drugs,
alcohol, or medication. A lapse in concentration while
operating the product may result in severe personal
injury.
Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
Operating similar tools nearby increases both the risk
of hearing injury and the potential for other persons to
enter your working area.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces and can increase the risk of kickback.
Keep all parts of your body away from any moving part.
Do not touch the area around the silencer or engine of
the product; these parts get very hot during operation.
Inspect the product before each use. Check for correct
operation of all controls including the chain brake.
Check for loose fasteners, fuel leaks, etc. Make sure all
guards and handles are properly and securely attached.
Replace any damaged parts before use.
Do not modify the product in any way or use parts
and accessories which are not recommended by the
manufacturer.
WARNING
If the product is dropped, suffers heavy impact or begins
to vibrate abnormally, immediately stop the product and
inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by
an authorised service centre.
When mixing fuel or filling fuel tank, do not smoke and
keep 10 m away from any source of ignition.
Mix and store fuel only in a container approved for fuel.
Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 10 m away from
refueling site before starting engine.
Stop the engine and allow it to cool before refueling,
storing or transporting the product.
Remember to properly close all fuel tank/container caps
after refueling or mixing.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
English |
1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rcs3840t

Table des Matières