Personal Protection Equipment; Use In Explosive Atmospheres - SATA jet X 5500 Mode D'emploi

Operating Manual SATAjet X 5500 RP/HVLP (DIGITAL)
• Use original SATA spare parts and accessories only!
• Disassemble and install components very carefully! Exclusively use
included special tools!
• Exclusively use spray gun washing machines recommended by SATA!
Please observe the operating instructions!
• Never spray materials containing acid, lye or benzine!
• Alyways keep the spray gun away from ignition sources, such as open
fire, burning cigarettes or non-explosion-proof electronic devices!
• When working with the spray gun, always limit solvents, paints or
other coating media to the quantities which are required for the paint
job! Excessive material must be returned to the designated storage
areas afterwards!

6.3. Personal Protection Equipment

• When using, cleaning or maintaining the spray gun, always wear
approved breathing and eye protection equipment as well as suitable
protective gloves, overalls and safety boots!
• When using the spray gun, noise levels of 85 dB(A) may be exceed-
ed. Wear suitable hearing protection!
• Hazard due to excessively hot surfaces
When processing hot materials (temperatures over 43 °C; 109.4 °F),
wear suitable protective clothing.
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.

6.4. Use in explosive atmospheres

The spray gun is permitted for use / storage in explosion hazard areas of
ex-zone 1 and 2. The product labelling must be adhered to.
Warning! Attention!
Warning!
EN
113