Service Menu - Dräger DrugTest 5000 Manuel Technique

3.9.6 Menu Data memory
The menu contains two functions that allow information
about data memory to be queried.
The menu functions can be activated if the unit is ready to
measure by using the key Menu , selecting Data memory and
then selecting the particular function.
Measurement statistics
This function is used to display the total number of
measurements in datalogger overall and the number of
positive measurements in datalogger.
1. Use the key to select Measurement statistics and
press the -key to activate.
OK
2. End the function by pressing the
Measurement data
This function is used to display a list of measurements in data
memory with date, time and result.
1. Use the key to select Measurement data and press
the -key to activate.
OK
2. In the list of measurements you can select the desired
measurement with
to call up a detailed view of the selected measurement.
3. The detailed view can be printed out; end the function with
the -key.
OK
4. Select return to menu and press
3.9.7

Service Menu

Service functions are only accessible for Dräger Services.
Dräger DrugTest 5000 Test System
-key.
OK
or and confirm with the
-key.
OK
-key
OK
Use
07223950_en.eps
19