Use
3.9.5
Menu Information
The menu contains two functions for interrogating the unit
parameters.
The menu functions can be activated if the unit is ready to
measure by using the key Menu , selecting Information and
then selecting the particular function.
Versions
This function is used to display unit parameter versions.
1. Use the key
to select Versions and press the
-key to activate.
OK
2. End the function by pressing the
Device statistics
This function is used to display detailed statistics about the
unit.
Last service 1
Last service 2 (QA-Check)
Counter service 1
Counter service 2 (QA-Check)
Measurements
Connection time [min]
1. Use the key
to select Unit statistics and press the
-key to activate.
OK
2. End the function by pressing the
18
-key.
OK
-key.
OK
Dräger DrugTest 5000 Test System
07123950_en.eps