Reely Redfox Notice D'emploi page 51

Roll trimming
If the helicopter tends to fly sideways to the right, push the trim button for the roll function (see also Figure 1, no. 6)
to the left. Keep the button pressed until the model no longer tends to fly to the right (see light arrows in Figure 15).
If the helicopter flies to the left, push the trim button for the roll function to the right (see dark arrows in Figure 15).
Pitch trimming
If the helicopter tends to fly forward, push the trim button for the bob function (see also Figure 1, no. 5) down. Keep
the button pressed until the model no longer tends to fly forward (see dark arrows in Figure 16).
If the helicopter automatically flies backward, push the trim button for the bob function up (see light arrows in Figure
16).
Since the helicopter has active altitude stabilisation, pitch trimming is not required. This is why the transmitter button
that is not required can be used to switch between beginner and expert modes.
Figure 15
Figure 16
51