Nussbaum WA 780 Manuel D'instructions page 82

Select type of vehicle
Databank
Job record
Skip vehicle selection
Select ROC
Push-mode ROC
3-point ROC
Recall ROC
Skip ROC
Select data summary
Skip summary
Data summary
Select steering type
Skip steering
Steering box centring
Select rear adjustment
If adjustable
82
Select rear adjustment
Always activated
Select second steering
If adjustable
Skip second steering
Second steering
Select Saving and printing
Do not save or print
Save
Save and print
Print
The alignment procedure can be customised
by combining the options mentioned above,
in a practical and rapid way, to speed up
the operations.
The working procedure can be opened and
modified from any screen you are in, also
while the alignment procedure is being
executed.
To select the options, use the ↑ and ↓ ar-
rows, confirm by pressing the Enter key. To
exit this screen and save the settings, press
F3, to exit without saving, press F2.
Exiting the screen saving the options estab-
lished implies the immediate execution of
the procedure selected.
User Manual WA 780 - Cura S 780